Hello !
Northern Virginia Jeepers Association
June 18, 2018, 12:30:55 AM

Pages: [1] 2 3 Go Down
  Print  
Author Topic: Serenity 2.0 Build  (Read 2325 times)
0 Members and 1 Guest are viewing this topic.
Dynamic
Offline
Member 2018
*
Posts: 604
« on: August 12, 2017, 11:30:47 AM »

Long Story sold my First JK about 2 years back 11 JKU Rubicon.. it was s silly mistake for the right reasons i thought at the time,  I had to live with  Duh

18 months later Got Tried of not having a jeep considered buying a project jeep spent some time looking around, then Circumstances Lined up and things worked out so sold the truck and
Bought a new 2017  JKU Rubicon Recon!  Cheers


Now I gotta start all over but I learned a lot from the last one so I will do things differently on this one, not so many changes and buying cheap stuff to bide time, gotta use patience and do it right the first time.  Grab a Wrench!

Day of Purchase



Current Mod List and Photo

Teraflex CT4 Long Arm w/ Falcon 3.3 Shocks
Falcon Nexus Stearing Stabilizer
Teraflex Hinged Tire Carrier
Bronze 17x9 Method 106 Beadlocks
Toyo MT 37x12.5x17
Yukon 4.88 Gears
Adams Front Driveshaft 1310 Extreme Duty Series
FlowMaster American Thunder High Tuck
AFE Exhaust CrossOver Relocation
ARB Onboard Air via Twin Compressor
SPOD Daul Led Switch&Source
Bushwaker Aluminium Fender Flares
Maximus-3 Classic Style Hoop
Artec JK Front Axel Armor Kit
Dynatrac Pro Steer Ball Joints
Teraflex HD Raised Rear Falcon Skids
ACE Engineering Engine / Trans Skids
Poison Spyder XD Crossmember
Poison Spyder Diff Covers
Carolina Metal Masters Knuckle Grab handles W/Extended Offroad Mirrors
Carolina Metal Master Customer Grab Bar w/ Ram Mounts
Superchips Flashcal F5
7" Round LED Driving Lights
Cobra 19 CB w/ Roadmaster PA
Firestick 3' Antenna
LED 3rd Brake Light Ring
Daystar Hood Latches
BOLT Hood Lock
Teraflex Brake Line Anchors
Bestop Underseat Lock Box
JKS Rear License Plate Relocation
EVO Evap Skid
Besttop NX Glide
AlienSunshade Custom Sunshade






To be Installed
LED Rock Lights




« Last Edit: June 13, 2018, 05:59:04 PM by Dynamic »

Logged

2011 JKU Rubicon Project "Serenity" -> SOLD
2017 JKU Rubicon Recon Serenity 2.0
Dynamic
Offline
Member 2018
*
Posts: 604
« Reply #1 on: August 12, 2017, 11:40:11 AM »

I have several Odds and ends left over from my last build so i started tossing some stuff on  First had to make sure it was lab approved



Check Tag it as Such



And a few things around the house / console pad / Stubby Antenna Daystar Hood Latches Ect ect






Logged

2011 JKU Rubicon Project "Serenity" -> SOLD
2017 JKU Rubicon Recon Serenity 2.0
Dynamic
Offline
Member 2018
*
Posts: 604
« Reply #2 on: August 12, 2017, 11:47:00 AM »

Less than a week later i ended up with some Friends at the PA Jeeps Show in York, got a ton of ideas but fell in love with the CMM Grab handles So Left with their complete setup to include Mirrors


DoorLess Test


I have plenty of assorted Ram Mounts lying around so testing with the phone mounted up there, not a big fan will leave it for the go pro


While i was there we did a little backroad exploring and got her in the dirt a bit and then got the windows Tinted


« Last Edit: August 12, 2017, 12:29:20 PM by Dynamic »

Logged

2011 JKU Rubicon Project "Serenity" -> SOLD
2017 JKU Rubicon Recon Serenity 2.0
Dynamic
Offline
Member 2018
*
Posts: 604
« Reply #3 on: August 12, 2017, 11:54:04 AM »

Next This last weekend i visted my parents where alot of my jeep stuff had been stored.  So i spent some time on getting the essentials back in order got a basic toolbag re-organized and found my recovery bag
 

Then Got basic some basic coms back up and running


And Redid The Re-end by relocating the Plate W/Light and Adding a Firestick Antenna, with a basic tune but still have to take it in to get properly tuned.  


Also mounted a PA horn that was in my box of CB parts..  So that's fun  Twisted Evil while i was putting that Temp in the front bumper i removed the stubbies and a fun sticker


Logged

2011 JKU Rubicon Project "Serenity" -> SOLD
2017 JKU Rubicon Recon Serenity 2.0
unl1mtd
Offline
BOD
*
Posts: 9039
King George, VA
« Reply #4 on: August 12, 2017, 01:07:23 PM »

Nice to have you back! Jeep looks nice, I like the Dino sticker.

Logged

Osiris
Offline
Forum User
Posts: 4503
« Reply #5 on: August 16, 2017, 10:59:57 AM »

Looks great Chris! I love the front bumper

Logged

Bobby

There is a fine line between "hobby" and "mental illness". - Dave Barry

Dynamic
Offline
Member 2018
*
Posts: 604
« Reply #6 on: September 13, 2017, 10:23:56 AM »

Thanks guys!

I have never not swapped the exhaust on any vehicle I have owned so this happened over the weekend Flowmaster Cat back system and I gotta say I love the fit and finish and the location over the old Dynomax system I had.

Pipe Comparison


This isn't the best picture but it tucks around everything and actually over the rear Sway bar. It looks like its sitting on it but once everything was tightened down there is a good half inch between them



Tip Comes out Just barely Under the bumper I will hit a few other things long before the exhaust hits


Logged

2011 JKU Rubicon Project "Serenity" -> SOLD
2017 JKU Rubicon Recon Serenity 2.0
DAMTALL
Offline
Thread Jackin' 24/7
Committee: Events
*
Posts: 5317
JEEP stands for Personal Freedom and Happiness!!
« Reply #7 on: September 13, 2017, 10:40:45 AM »

Thanks guys!

I have never not swapped the exhaust on any vehicle I have owned so this happened over the weekend Flowmaster Cat back system and I gotta say I love the fit and finish and the location over the old Dynomax system I had.

Tip Comes out Just barely Under the bumper I will hit a few other things long before the exhaust hits


I think it looks great!!  But I have a question for you, and I am not trying to be a negative nancy, but with the pipe ending where it does on your bumper, is there any chance it gets hot enough to melt the bumper cover?  Just curious!  Dunno?

Logged

Big Mike - 2012 JKU Crush, 2.5" Teraflex Lift with Shocks, JKS Quick Discos, RockHard4x4 Skids and Evap Bracket, JCR Crusader Bumpers (mid-width front, mid-width rear with tire carrier).
Dynamic
Offline
Member 2018
*
Posts: 604
« Reply #8 on: September 13, 2017, 11:04:45 AM »

I think it looks great!!  But I have a question for you, and I am not trying to be a negative nancy, but with the pipe ending where it does on your bumper, is there any chance it gets hot enough to melt the bumper cover?  Just curious!  Dunno?

Not negative nancy at all!   It does point down so I am not sure how much of an overall problem it would be

That said the recon has the Hardrock Bumpers which are steel so not worried about them melting  Thumbs Up

Logged

2011 JKU Rubicon Project "Serenity" -> SOLD
2017 JKU Rubicon Recon Serenity 2.0
highlandercj-7
Offline
Member 2018 VA4WD
*
Posts: 1131
« Reply #9 on: September 13, 2017, 12:33:28 PM »

I love it. How does it sound?

Logged

HighlanderCJ-7
Dynamic
Offline
Member 2018
*
Posts: 604
« Reply #10 on: January 31, 2018, 08:33:00 PM »

Parts i starting to show up for my massive Feb overhaul




Sent from my SM-G955U using Tapatalk

« Last Edit: January 31, 2018, 08:35:15 PM by Dynamic »

Logged

2011 JKU Rubicon Project "Serenity" -> SOLD
2017 JKU Rubicon Recon Serenity 2.0
AngryEchoSix
Offline
Forum User
Posts: 71
Busted Knuckle Garage Expert
« Reply #11 on: February 04, 2018, 10:08:56 PM »

OK, those wheels....where did you get them, and what model are they? They have rustled my jimmies. I love the look of bronze wheels on the black JK....

Logged

2014 JK Unlimited Rubicon X
Jeep Freak
Offline
Website Committee/TRC
BOD
*
Posts: 1163
Jeep Jedi
« Reply #12 on: February 06, 2018, 07:13:55 AM »

OK, those wheels....where did you get them, and what model are they? They have rustled my jimmies. I love the look of bronze wheels on the black JK....

they are Method 106s
https://www.methodracewheels.com/collections/all/products/106-beadlock-bronze

and I have never heard the expression "rustled my jimmies".  ROTFLMAO
« Last Edit: February 06, 2018, 07:15:47 AM by Jeep Freak »

Logged

'93 YJ SOA on 36s
'13 JKUR
Dynamic
Offline
Member 2018
*
Posts: 604
« Reply #13 on: February 06, 2018, 07:39:19 AM »


^--- What he said   
I got them from Northridge 4x4

Logged

2011 JKU Rubicon Project "Serenity" -> SOLD
2017 JKU Rubicon Recon Serenity 2.0
AngryEchoSix
Offline
Forum User
Posts: 71
Busted Knuckle Garage Expert
« Reply #14 on: February 06, 2018, 05:26:18 PM »

What's the legality of running beadlocks here in VA? I know a lot of shops won't touch beadlocks, so I'm curious. Also, what about balancing? edge weights, stick on weights, or a loose media inside the tire so it balances on the go? (Sorry for so many questions, I'm trying to plan out the build on my JKUR)

Logged

2014 JK Unlimited Rubicon X
Pages: [1] 2 3 Go Up
  Print  
 
Jump to:  

Powered by EzPortal
Officers:
President: Stephen Clough (overhead) | Vice President: John Davis (jdavis2nd) | Secretary: Robyn Kronthal (sticksout)
 Treasurer: Danille Wilson (TJ Girl) | Member-at-large: Alex Zaiken (z4iken)

Board of Directors:
Andrew Harvin (HarvinJeep) | Dave Plummer (HAWAIICJ) | Sean McCready (Unl1mtd)
Jeff Wilson (jwilson2598) | Aaron Thomson (Jeep Freak) | Dain Wilson (Gr8Dain)

Founding Fathers:
 Jason Markvart (LNDSRK)  | Steve Scott (Islander90) | Josh Storer (Jastor)| Mike Finelli (BiggMike) | John Harper (Opie)

Disclaimer Statement:
All images from NoVaJeepers.net are exclusive to the Northern Virginia
Jeepers Association. Any reproduction of exclusive Northern Virginia
Jeepers Association material is strictly prohibited without written
consent of the Northern Virginia Jeepers Association. Jeep,
Wrangler, Cherokee, Commander, Compass, Patriot, Liberty, Unlimited,
Rubicon, SRT, HEMI and Grand Cherokee are copyrighted and trademarked
to Chrysler LLC. NoVaJeepers.com, Northern Virginia Jeepers Association
is not in any way associated with the Chrysler LLC.
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines | Theme Design by: Xarcell